1 00:00:03,970 --> 00:00:04,560 Hi there. 2 00:00:04,600 --> 00:00:10,360 In this story, we are going to learn how to use these stroke options, are we going to use them to 3 00:00:10,360 --> 00:00:18,370 create some awesome strokes, such as shapes with dashed lines, curves with arrows and a profile and 4 00:00:18,610 --> 00:00:21,430 some dotted lines here, which is very important? 5 00:00:21,670 --> 00:00:27,130 And also, we going to create a grid with some arrows inside, some awesome work that will help you 6 00:00:27,130 --> 00:00:28,840 to create even better designs. 7 00:00:29,290 --> 00:00:32,790 So let's start our plastic surgeon, OK? 8 00:00:32,860 --> 00:00:38,170 Hopefully you do it only in your state or not in real life to follow along with me and to do the work 9 00:00:38,170 --> 00:00:45,400 you need to open the strokes, dot a I and you will get this lady where we are going to see how we are 10 00:00:45,400 --> 00:00:48,730 going to do the surgery using these stroke options. 11 00:00:49,940 --> 00:00:53,900 So let's start first of all, I'm going to come under the eyes here and zoomIn. 12 00:00:56,190 --> 00:01:02,520 Most of the option I will show you now, they apply for all what you learned, the shares, the segment, 13 00:01:02,520 --> 00:01:07,560 whatever it is inside here, but not all of them will apply to the brushtail. 14 00:01:08,280 --> 00:01:13,470 Remember that got to start with the pencil and start drawing something just like this. 15 00:01:13,620 --> 00:01:14,550 OK, that will do. 16 00:01:15,210 --> 00:01:16,710 Now, let's go to stock option. 17 00:01:17,680 --> 00:01:22,170 And then you notice here you have several groups, the first group is about the stroke itself. 18 00:01:22,180 --> 00:01:27,520 It's with the cup, that's the extremities, the corner and the stroke. 19 00:01:27,530 --> 00:01:29,140 This applies to cruise ships. 20 00:01:29,770 --> 00:01:31,990 So let's go and zoom in. 21 00:01:31,990 --> 00:01:34,210 First of all, I will zoom in, OK? 22 00:01:34,300 --> 00:01:35,050 Just put it here. 23 00:01:35,990 --> 00:01:37,510 The first one is the cap. 24 00:01:37,550 --> 00:01:44,240 The cap is about the beginning and the end of the path, the beginning start with an anchor point and 25 00:01:44,240 --> 00:01:46,210 the end starts with the anchor point. 26 00:01:46,670 --> 00:01:48,200 So you have backup there. 27 00:01:48,220 --> 00:01:52,170 Just stop off in the same direction where the path has come. 28 00:01:52,730 --> 00:01:55,280 Also, you have a round where you round them. 29 00:01:56,240 --> 00:02:00,980 So notice it has rounded and projected beyond the anchor point. 30 00:02:01,550 --> 00:02:03,170 So really, you have one point. 31 00:02:03,170 --> 00:02:08,210 If I take it more, you will notice the projection here will go now, four points, something like this. 32 00:02:08,450 --> 00:02:12,620 This is important if you're doing, you know, some very precise artwork. 33 00:02:13,070 --> 00:02:15,330 And also you have the projecting cap. 34 00:02:15,410 --> 00:02:19,800 If you click on it here you are is projecting beyond the anchor point. 35 00:02:20,420 --> 00:02:21,910 Now you have corners. 36 00:02:21,920 --> 00:02:25,880 But what is really called a corner, this is a corner. 37 00:02:26,000 --> 00:02:27,380 So it has a hard angle. 38 00:02:27,620 --> 00:02:30,530 So it's like the stroke comes over here, stops and continues. 39 00:02:31,040 --> 00:02:33,610 Now, let me give you an example of what is not a corner. 40 00:02:33,830 --> 00:02:38,300 So this is a corner, but this or this is not a corner. 41 00:02:38,810 --> 00:02:39,710 If you are driving. 42 00:02:39,710 --> 00:02:40,550 This is a corner. 43 00:02:40,970 --> 00:02:42,460 Actually, in graphics. 44 00:02:42,470 --> 00:02:43,270 There's not a corner. 45 00:02:43,280 --> 00:02:44,090 This is a curve. 46 00:02:44,360 --> 00:02:45,260 This is a curve. 47 00:02:45,260 --> 00:02:49,540 L.A. So let's stick to graphic design and not driving. 48 00:02:49,820 --> 00:02:51,380 So here we have a corner. 49 00:02:51,660 --> 00:02:54,980 If we come to the stroke here, you would not have options for the corners. 50 00:02:55,370 --> 00:02:57,350 The first option is the matter joint. 51 00:02:57,590 --> 00:03:04,100 Actually, it's like the stroke comes in and goes out there and you have a hard corner here or hard 52 00:03:04,100 --> 00:03:04,390 angle. 53 00:03:05,030 --> 00:03:07,070 The second one is the round joint. 54 00:03:07,160 --> 00:03:08,960 So you are rounding them. 55 00:03:09,140 --> 00:03:14,480 You notice how it has around it over here and you have the Bevell joint. 56 00:03:14,750 --> 00:03:16,190 It just cut it off. 57 00:03:17,360 --> 00:03:22,400 So let's get to Rob now, you have a stroke here, which does not apply to the pen. 58 00:03:22,670 --> 00:03:24,500 Let me show you where it applies. 59 00:03:25,930 --> 00:03:29,720 I zoom out this come over here, I'm going to draw a rectangle. 60 00:03:29,830 --> 00:03:33,210 OK, I'm going to have the stroke so you can see it very well. 61 00:03:33,490 --> 00:03:34,330 Come to the stroke. 62 00:03:34,480 --> 00:03:42,670 And Noticia, by the way, the corners apply to ships so you can round or Bevell the corner of a ship, 63 00:03:42,670 --> 00:03:43,840 which is very interesting here. 64 00:03:44,960 --> 00:03:52,370 What is a line struck you notice you have the banning box, the red one here and now our option is to 65 00:03:52,370 --> 00:03:58,340 center the stroke, meaning half of it is on the inside of the building box and half of it is on the 66 00:03:58,340 --> 00:03:58,800 outside. 67 00:03:59,090 --> 00:04:04,550 You could say, I want it all on the inside or I want it all on the outside. 68 00:04:04,820 --> 00:04:06,800 Depending on the graphic, you're doing good. 69 00:04:07,220 --> 00:04:08,670 Let's keep this rectangle there. 70 00:04:08,780 --> 00:04:10,670 We are going to give you more examples. 71 00:04:11,930 --> 00:04:14,210 And the next option is dashed lines. 72 00:04:14,540 --> 00:04:19,940 OK, let's do we can take the same one and good stroke and enable dashed lines. 73 00:04:20,290 --> 00:04:21,860 Now, I'm going to delete this. 74 00:04:23,740 --> 00:04:30,910 Five will do five dashes, so not just now, you have the dash over here, you have a dash and a couple 75 00:04:30,910 --> 00:04:36,670 assuming you're not, you have a dash and a gap because I did not specify any gap. 76 00:04:36,680 --> 00:04:38,970 It takes the same size as the dash. 77 00:04:39,160 --> 00:04:43,240 So if you create the dash to seven, the gap will be also seven. 78 00:04:43,570 --> 00:04:46,220 But you can specify a gap, for example, three. 79 00:04:46,570 --> 00:04:47,200 Here you are. 80 00:04:48,430 --> 00:04:50,110 So now we have a gap of three. 81 00:04:50,290 --> 00:04:57,480 You can also have another dash, for example, of five, another gap of, I don't know, five. 82 00:04:57,850 --> 00:04:59,660 OK, that will have been the same. 83 00:05:00,430 --> 00:05:01,300 Something like this. 84 00:05:03,480 --> 00:05:06,100 I guarantee this guy the rest will be deleted. 85 00:05:06,120 --> 00:05:06,470 Also. 86 00:05:07,390 --> 00:05:09,550 But not just here, what's happening, OK? 87 00:05:10,130 --> 00:05:13,740 You notice you have two options for the dashes. 88 00:05:14,530 --> 00:05:15,340 The first option. 89 00:05:15,370 --> 00:05:20,590 We start with the dash and dash gap and so on, and they try to fix itself at the end here. 90 00:05:21,040 --> 00:05:22,420 And that's how the corner is. 91 00:05:23,230 --> 00:05:27,280 The better option is a line dashes and here you are. 92 00:05:27,790 --> 00:05:31,620 So I'm going to move around the corner for now with this option. 93 00:05:31,630 --> 00:05:33,190 It aligns the dashes. 94 00:05:33,190 --> 00:05:36,700 And on the corner here, you will have a dash. 95 00:05:37,840 --> 00:05:39,290 Let's show you another example. 96 00:05:39,790 --> 00:05:44,280 So if you come over here to do something like this, OK? 97 00:05:45,790 --> 00:05:51,580 And then you come to the stroke, let's reduce the stroke, and then this is the first option, I'm 98 00:05:51,580 --> 00:05:56,080 going to go for the second option and notice all the corners now have dashes. 99 00:05:56,080 --> 00:05:57,280 It's much nicer design. 100 00:05:58,200 --> 00:05:59,010 Listen to this. 101 00:06:00,290 --> 00:06:06,140 Now, let's go for the selection to select this guy got a stroke and I wanted a round cap and Round 102 00:06:06,140 --> 00:06:07,490 Corners is pretty nice. 103 00:06:08,560 --> 00:06:13,370 Let's go ahead and duplicate it just over here. 104 00:06:14,080 --> 00:06:15,970 Now let's go for the curvature tool. 105 00:06:16,090 --> 00:06:21,990 I'm going to draw something nice to control and click to this select start with the curvature tool, 106 00:06:22,000 --> 00:06:26,200 one here and one here and one here. 107 00:06:26,560 --> 00:06:30,460 And that's school is go for the selection tool symmetric. 108 00:06:30,460 --> 00:06:31,800 But you know, it's okay. 109 00:06:32,500 --> 00:06:35,080 Let's go now and work on the dashed lines. 110 00:06:35,080 --> 00:06:39,120 But what I would like to create is a dotted line to create a dotted line. 111 00:06:39,130 --> 00:06:42,040 You make sure that the real cap is on. 112 00:06:42,930 --> 00:06:44,290 The country doesn't matter. 113 00:06:44,580 --> 00:06:46,930 And then we come to dashers and you say zero. 114 00:06:47,370 --> 00:06:49,410 Now you have small dots all over. 115 00:06:49,410 --> 00:06:51,890 You want them bigger, just increase the weight. 116 00:06:52,140 --> 00:06:54,690 And of course, you will want to increase the gap here. 117 00:06:54,990 --> 00:06:57,510 Let's put it at six, something like this, OK? 118 00:06:58,780 --> 00:07:04,120 Now, let's come to the fore head here, I'm going to use the curvature to control and command to this 119 00:07:04,120 --> 00:07:08,320 select and draw something just like this, OK? 120 00:07:08,850 --> 00:07:17,470 Of course, now it's reverting to the default, come over to the stroke and then no cap and actually 121 00:07:17,470 --> 00:07:18,520 no dashed lines. 122 00:07:19,570 --> 00:07:20,740 And it's three points. 123 00:07:20,950 --> 00:07:23,140 Reduce it to two or one point. 124 00:07:23,320 --> 00:07:23,610 We do. 125 00:07:24,070 --> 00:07:25,930 Now, let's focus on the arrowhead here. 126 00:07:26,260 --> 00:07:31,180 You can add an arrow at the beginning of the path, not at the left or right. 127 00:07:31,180 --> 00:07:32,490 It's at the beginning of the path. 128 00:07:32,710 --> 00:07:35,970 So if you draw it from right to left, the beginning will be on the right. 129 00:07:36,520 --> 00:07:39,400 And this one also left and another arrow at the end. 130 00:07:40,660 --> 00:07:42,880 These arrows are too big for what I want to do. 131 00:07:42,910 --> 00:07:44,140 I want to reduce the size. 132 00:07:45,250 --> 00:07:49,630 You're not just here, you have the scale for the others and you have a chain link in the chain link 133 00:07:49,630 --> 00:07:55,290 is on, we can reduce the size of both left and right or beginning and end at the same time. 134 00:07:56,670 --> 00:08:02,970 You can also add a profile, which I always like, if you unchain, you can increase the size of one 135 00:08:02,970 --> 00:08:03,960 of them, for example. 136 00:08:05,080 --> 00:08:10,210 So let's take this one comment click to deselect our press option and comment, because I don't want 137 00:08:10,210 --> 00:08:14,950 to go to for the Black Arrow, make one and make another one. 138 00:08:15,430 --> 00:08:21,700 And I'm going to select the ship over here, come back to stroke and put the airline stock the normal 139 00:08:21,700 --> 00:08:29,110 way, reduce a bit the stroke rate and go for the dash and go for the normal cap. 140 00:08:29,440 --> 00:08:34,570 So I'm going to give a dash here of five and really no gap. 141 00:08:35,010 --> 00:08:35,740 Read the gap. 142 00:08:35,770 --> 00:08:36,730 OK, here. 143 00:08:37,340 --> 00:08:38,550 So that's what's happening. 144 00:08:38,600 --> 00:08:39,520 If I click out. 145 00:08:40,500 --> 00:08:43,200 They're not the corners, really not nice at all. 146 00:08:43,440 --> 00:08:49,500 What you can do is to come to the stroke and select the second options which ensure that the dashes 147 00:08:49,680 --> 00:08:51,420 are around the corners. 148 00:08:51,720 --> 00:08:57,150 And if you come to stroke and just put this one to zero, so that's zero. 149 00:08:57,150 --> 00:08:57,960 Got five. 150 00:08:58,260 --> 00:08:59,950 Make sure you have a rounded cup. 151 00:08:59,970 --> 00:09:00,480 Here you are. 152 00:09:00,720 --> 00:09:02,070 You have a daughter circle. 153 00:09:02,280 --> 00:09:07,280 And also you can have in the same thing a star as to the star. 154 00:09:08,070 --> 00:09:12,310 Unfortunately, you have to go back to a stroke and select the second option for it to set. 155 00:09:12,690 --> 00:09:16,920 So I actually have a dot at every corner political fight. 156 00:09:17,160 --> 00:09:18,560 So let's apply this here. 157 00:09:18,810 --> 00:09:24,650 I'm going to take any leaps and draw the ellipse just over here, something like this up. 158 00:09:24,660 --> 00:09:26,280 Don't be very congested. 159 00:09:26,880 --> 00:09:29,730 OK, put it here and go for the stroke. 160 00:09:29,940 --> 00:09:36,690 Actually I don't want round so I'm going to use a five by five that will be nice and remove it just 161 00:09:36,690 --> 00:09:37,260 like this. 162 00:09:37,450 --> 00:09:39,310 Reduce the size is too much. 163 00:09:39,780 --> 00:09:41,340 OK, that will be cool. 164 00:09:42,600 --> 00:09:45,750 OK, another option for the arrows. 165 00:09:48,720 --> 00:09:54,270 We have the possibility to extend the arrow beyond the last anchor point and of course, the first anchor 166 00:09:54,270 --> 00:09:56,760 point, the option is here, extend the arrow. 167 00:09:57,000 --> 00:09:58,560 So this is extended. 168 00:09:59,160 --> 00:10:00,330 This is inside. 169 00:10:03,500 --> 00:10:08,330 Now, let's make it more beautiful, let's draw certain things, I'm going to come to the line segment 170 00:10:08,870 --> 00:10:12,500 and just draw arrows just like this, OK? 171 00:10:12,510 --> 00:10:17,030 Appreciate to have some arrows, which we are going to be OK. 172 00:10:17,520 --> 00:10:18,970 So I'm going to select all of them. 173 00:10:20,390 --> 00:10:25,510 Come to the slok here and add the arrow and reduce its sights. 174 00:10:25,770 --> 00:10:29,050 OK, that's pretty fine here, but actually it is not what I want. 175 00:10:29,060 --> 00:10:30,980 I want the arrows to come from down to up. 176 00:10:31,340 --> 00:10:34,200 Well, I have the option here to swap the arrows. 177 00:10:34,220 --> 00:10:34,710 Here you are. 178 00:10:34,970 --> 00:10:36,830 So if you had another arrow over here. 179 00:10:37,310 --> 00:10:40,020 OK, let's take one just like this, OK? 180 00:10:40,580 --> 00:10:42,170 And then you can swap them. 181 00:10:42,750 --> 00:10:45,110 OK, pretty nice and pretty useful. 182 00:10:45,120 --> 00:10:45,710 By the way. 183 00:10:45,920 --> 00:10:47,180 You won't waste your time. 184 00:10:47,810 --> 00:10:50,940 Now let's take these guys here and duplicate them. 185 00:10:50,960 --> 00:10:54,240 I put another one here and another one here. 186 00:10:54,720 --> 00:10:57,380 OK, let's draw now a grid. 187 00:10:57,950 --> 00:11:01,030 OK, something we haven't seen this rectangular creature. 188 00:11:01,490 --> 00:11:04,750 So you come over and you draw like you don't like a rectangle. 189 00:11:05,150 --> 00:11:11,050 But now if you use the Aparo, you will increase the horizontal lines down arrow. 190 00:11:11,060 --> 00:11:17,860 You decrease the horizontal line, the right arrow, you will increase the vertical lines left arrow, 191 00:11:17,900 --> 00:11:21,470 you will increase them or decrease them. 192 00:11:22,350 --> 00:11:27,640 OK, so just like this now, not this, if I release, I will not be able to use the arrows. 193 00:11:27,660 --> 00:11:34,560 So now I still have my mouse down, OK, I still going to reduce them a bit just like this. 194 00:11:34,890 --> 00:11:36,810 And from here also reduce them. 195 00:11:37,380 --> 00:11:38,310 OK, that will do. 196 00:11:39,420 --> 00:11:41,740 Cool, just like this space bar to move it. 197 00:11:42,240 --> 00:11:47,340 I'm going to move it just over here, but let's go to the stroke now and reduce the stroke, OK? 198 00:11:47,340 --> 00:11:48,330 Want the very thing? 199 00:11:48,750 --> 00:11:50,000 We could change the color also. 200 00:11:50,220 --> 00:11:52,740 And let's add some arrows to the grid. 201 00:11:53,010 --> 00:11:54,060 That would be interesting. 202 00:11:54,360 --> 00:11:55,410 Very interesting arrows. 203 00:11:55,570 --> 00:11:57,060 So that is the beginning. 204 00:11:57,060 --> 00:11:58,650 Not as where it's beginning. 205 00:11:59,010 --> 00:11:59,440 OK. 206 00:11:59,460 --> 00:12:00,570 And that is the end. 207 00:12:01,630 --> 00:12:05,590 Very cool, right, guys, this reduce the size of the chain link on. 208 00:12:08,220 --> 00:12:11,760 And then I would change the color to some dark green like this. 209 00:12:12,440 --> 00:12:15,070 Oh, that's very beautiful comment zero to see. 210 00:12:15,120 --> 00:12:15,780 Here you are. 211 00:12:17,460 --> 00:12:24,060 You have done all that is required to do her much more beautiful than before is going to be a fantastic 212 00:12:24,060 --> 00:12:24,600 surgery. 213 00:12:25,140 --> 00:12:26,600 Now you need to experiment. 214 00:12:26,610 --> 00:12:27,680 You need to play with this. 215 00:12:27,690 --> 00:12:31,630 That would be very interesting if you come over and create your own. 216 00:12:31,650 --> 00:12:37,560 OK, this is mainly to demonstrate for you, which can be quite artistic now and use all the tools that 217 00:12:37,560 --> 00:12:41,440 you need except the brush to please and really create something. 218 00:12:41,550 --> 00:12:42,990 They are some, for example. 219 00:12:44,000 --> 00:12:50,150 You could use the R, for example, come to the R, come to the stroke, I need to reset it and no dashes 220 00:12:50,390 --> 00:12:53,420 and create a very nice arc just like this. 221 00:12:53,730 --> 00:12:54,710 But as the shift key. 222 00:12:55,740 --> 00:13:02,820 And then rotate the arc, I would go for the selection tool and just rotate the arc like this, I just 223 00:13:03,000 --> 00:13:07,320 put it over here and say, OK, I want some arrows. 224 00:13:07,320 --> 00:13:09,540 One on the left, one on the right. 225 00:13:09,840 --> 00:13:12,570 I want them to be, you know, projecting a bit. 226 00:13:12,570 --> 00:13:15,980 And I really want to reduce their size because that's the key. 227 00:13:16,020 --> 00:13:20,170 I like the key because I can see them getting smaller and reduce the stroke. 228 00:13:20,490 --> 00:13:21,360 Now I need them bigger. 229 00:13:21,590 --> 00:13:26,850 OK, so now that we're fine and let's add some dashes for this girl. 230 00:13:27,150 --> 00:13:28,140 But we don't want this. 231 00:13:28,140 --> 00:13:31,870 I should want a 10 dash and I'm taking the second option. 232 00:13:32,640 --> 00:13:33,270 Here you are. 233 00:13:33,510 --> 00:13:35,810 OK, now it's awesome. 234 00:13:36,120 --> 00:13:38,550 So you can do your work and do your surgery. 235 00:13:38,930 --> 00:13:41,230 Good guys come over and play as much as you want. 236 00:13:41,250 --> 00:13:43,170 There is no assignment for this one. 237 00:13:43,170 --> 00:13:47,130 Just playing around, doing it much nicer than I have done. 238 00:13:47,580 --> 00:13:48,860 I was here in the next Ottery.