1
00:00:03,740 --> 00:00:10,340
Welcome to the with tool, though, with Tool is pretty interesting, I'm going to show you in this

2
00:00:10,340 --> 00:00:11,600
video how it works.

3
00:00:12,260 --> 00:00:13,820
Show you also a couple of examples.

4
00:00:14,090 --> 00:00:17,870
And in the next one, we are going to do some awesome artwork.

5
00:00:18,580 --> 00:00:25,510
Fine, let's start the selected this board, the empty one, and press command or control zero and go

6
00:00:25,510 --> 00:00:28,600
for the Bantul and draw a bath.

7
00:00:29,340 --> 00:00:30,220
Oh, it's OK.

8
00:00:30,730 --> 00:00:34,360
Let's try another path here, because I want to show you something else now.

9
00:00:34,480 --> 00:00:37,870
The withdrawal is just over here, the way it works.

10
00:00:38,200 --> 00:00:42,660
You point on the path and notice the path doesn't have to be selected.

11
00:00:42,970 --> 00:00:46,320
OK, that's important because it will play some tricks on you later on.

12
00:00:47,200 --> 00:00:48,550
You can click and drag.

13
00:00:48,550 --> 00:00:51,370
If you drag the wrong direction, nothing will happen.

14
00:00:51,580 --> 00:00:54,300
So I'm going to drag up and notice what's happening.

15
00:00:54,550 --> 00:00:56,290
The stroke has been increased.

16
00:00:56,290 --> 00:00:57,580
Now it's 14 points.

17
00:00:57,580 --> 00:00:59,530
Now is 16 something like this.

18
00:00:59,810 --> 00:01:03,850
OK, if I release, you will notice that you have three points.

19
00:01:03,970 --> 00:01:08,830
One for the side, one that's twelve point another one for cyto.

20
00:01:08,830 --> 00:01:15,430
That's the extremities and there is one in the middle and also two other with points have been created

21
00:01:15,640 --> 00:01:18,490
which are at the extremities and have zero point.

22
00:01:18,490 --> 00:01:19,090
Five point.

23
00:01:20,050 --> 00:01:25,780
Yet, if you remember, our stroke was only one point, so it changed to zero point five, create the

24
00:01:25,780 --> 00:01:29,210
point here, your point and another one on the extremities.

25
00:01:29,830 --> 00:01:36,340
Now you can click and drag and move it around like the way you would like it, can position it and see

26
00:01:36,340 --> 00:01:37,930
if this is exactly what you want.

27
00:01:38,500 --> 00:01:45,250
You can also click on one side on either side, in fact, and increased or decreased or adjusted the

28
00:01:45,250 --> 00:01:46,000
way you would like.

29
00:01:48,240 --> 00:01:54,840
Now, of course, you can add more points, OK, just make sense and move them around, OK?

30
00:01:54,840 --> 00:01:58,830
Until you reach the next point or the previous point, it stops.

31
00:01:58,950 --> 00:02:00,300
So you cannot overlap.

32
00:02:00,300 --> 00:02:01,520
You cannot move it over here.

33
00:02:01,830 --> 00:02:04,500
It stops on the next point or the previous one.

34
00:02:05,600 --> 00:02:12,560
Another way you can work is to press the option key that will be out on the PC point on one side.

35
00:02:13,420 --> 00:02:19,570
And here you are, you are just moving or increasing the stroke on one side, which is pretty useful

36
00:02:19,570 --> 00:02:21,350
sometimes, actually.

37
00:02:21,400 --> 00:02:23,830
This is the basic this is all there is to it.

38
00:02:24,280 --> 00:02:28,420
You can come over, for example, over here, adjust it the way you would like.

39
00:02:28,960 --> 00:02:30,700
OK, simple.

40
00:02:31,090 --> 00:02:32,460
So you can move it around.

41
00:02:32,590 --> 00:02:35,400
You can adjust one side or both sides at the same time.

42
00:02:36,820 --> 00:02:37,840
I will leave this to.

43
00:02:39,340 --> 00:02:40,980
And go for a player.

44
00:02:41,020 --> 00:02:43,340
I'm going to start with any leap's and pretty interesting.

45
00:02:43,780 --> 00:02:46,780
This is my lips and the width is like it was before.

46
00:02:46,780 --> 00:02:50,860
So I reduce it to one stroke, then go for the width tool.

47
00:02:51,280 --> 00:02:53,310
I'm going to create a Whitbourne just over here.

48
00:02:53,860 --> 00:02:55,410
But notice what's happening.

49
00:02:55,900 --> 00:02:58,980
The point I've added it is eight points, OK?

50
00:02:59,290 --> 00:03:03,600
And the opposite side just diagonally opposite it is zero point five.

51
00:03:03,760 --> 00:03:10,270
So it's always try to find a point which in this case is the opposite side for the lips and says it's

52
00:03:10,270 --> 00:03:11,150
zero point five.

53
00:03:11,530 --> 00:03:17,600
Another point has been created for you, and this is the point to decrease it even faster.

54
00:03:18,010 --> 00:03:18,510
Here you are.

55
00:03:18,510 --> 00:03:21,280
You can do something like this if you want to mess it up.

56
00:03:21,700 --> 00:03:25,950
And also you can decrease this one or even make it zero if you want to.

57
00:03:26,410 --> 00:03:29,350
Quite useful when you are using the Ellipse tool.

58
00:03:29,950 --> 00:03:33,910
Let's go now for the rectangle and just make a rectangle.

59
00:03:34,450 --> 00:03:42,040
It doesn't matter if you're square and then go for the withdrawal and click in the middle here and take

60
00:03:42,040 --> 00:03:42,320
it up.

61
00:03:42,920 --> 00:03:48,150
Now, this is the at your point and two other points where it is also zero point five.

62
00:03:48,400 --> 00:03:49,290
So that's the rule.

63
00:03:49,810 --> 00:03:51,850
And then you can do something else here.

64
00:03:52,980 --> 00:03:55,890
And it's quite good that it's working on one side at a time.

65
00:03:57,540 --> 00:04:02,580
Of course, you could change that, not even by deleting the points, but using it with a profile that

66
00:04:02,580 --> 00:04:03,570
we'll see a bit later.

67
00:04:04,260 --> 00:04:08,250
Let's zoom out and then click over here and zoom in.

68
00:04:08,250 --> 00:04:10,620
Amusing using, of course, command or control zero.

69
00:04:11,220 --> 00:04:13,110
And let's select this pass.

70
00:04:13,110 --> 00:04:19,400
So I will go for the selection tool and selected and zoom in control plus or comment plus on the mock.

71
00:04:21,360 --> 00:04:25,330
I would go for the withdrawal and create what I like.

72
00:04:25,350 --> 00:04:25,920
Here you are.

73
00:04:26,720 --> 00:04:27,710
And here you are.

74
00:04:28,940 --> 00:04:33,800
So if I'm happy with this, but I want it here, you know, at zero point, I can click and drag and

75
00:04:33,800 --> 00:04:34,730
make it zero.

76
00:04:35,270 --> 00:04:37,850
OK, it's much better if you zoom in.

77
00:04:37,850 --> 00:04:39,500
Of course you are.

78
00:04:39,830 --> 00:04:44,050
Click on the bottom left or right on one side and make it zero.

79
00:04:44,360 --> 00:04:45,500
Let's go down here.

80
00:04:46,930 --> 00:04:53,050
I think it is down here and make it zero and this one also zero.

81
00:04:54,330 --> 00:04:57,390
Now, I did some work here to get them to be zero.

82
00:04:57,420 --> 00:04:57,960
All of them.

83
00:04:58,880 --> 00:05:06,560
But there is a better way, the better way is like this, less the now select these two and come to

84
00:05:06,560 --> 00:05:11,300
the with the profile here you notice if I select one, there is a profile.

85
00:05:11,750 --> 00:05:15,350
If I select both, of course they have different profiles or nothing is here.

86
00:05:15,650 --> 00:05:18,190
I'm going to go back to uniform, OK.

87
00:05:18,470 --> 00:05:21,260
And adjust the stroke to be just one.

88
00:05:22,250 --> 00:05:30,140
Now, selecting one path, I will go for the withdrawal and I have a profile here, so it is uniform

89
00:05:30,500 --> 00:05:34,910
so I can open the profile and choose one of the preset profiles.

90
00:05:35,180 --> 00:05:37,940
The most interesting is this one over here, OK?

91
00:05:38,360 --> 00:05:41,990
Now, notice it has made it zero point here, zero point here.

92
00:05:42,290 --> 00:05:45,500
And it's clear there are other point here, which is zero point five.

93
00:05:45,950 --> 00:05:51,560
Of course, now we can increase the stroke the way you would like and you still have the same kind of

94
00:05:51,560 --> 00:05:52,100
profile.

95
00:05:52,520 --> 00:05:55,040
You can do the same for here over a bit.

96
00:05:55,040 --> 00:05:55,820
Doesn't matter.

97
00:05:56,000 --> 00:05:58,220
Then come back and select this profile.

98
00:05:58,940 --> 00:06:01,790
Now notice I'm clicking and nothing is happening.

99
00:06:01,940 --> 00:06:03,070
I click the other one.

100
00:06:03,290 --> 00:06:11,210
Notice I changed the one that is selected using the Black Arrow as I do, and then to select the path

101
00:06:11,210 --> 00:06:13,360
you want to work on you press command.

102
00:06:13,370 --> 00:06:14,330
You already know that.

103
00:06:14,330 --> 00:06:18,380
Maybe I click on the path and now notice the profile.

104
00:06:18,560 --> 00:06:24,100
I'm going to change it to this profile and increase the stroke the way I'd like political.

105
00:06:24,230 --> 00:06:26,870
And guys know something more interesting here.

106
00:06:27,740 --> 00:06:30,420
Over here, I will use the selection tool to select it.

107
00:06:30,680 --> 00:06:33,920
I have a single path from beginning to end.

108
00:06:34,490 --> 00:06:40,820
Now, if I go further with stool and I can play with the path, but not as what happens, it stopped

109
00:06:40,820 --> 00:06:41,520
over here.

110
00:06:41,600 --> 00:06:43,280
It did not change the path over here.

111
00:06:43,550 --> 00:06:49,040
Seeking consolation this hard corner, you can come over and create another one.

112
00:06:49,400 --> 00:06:54,390
And of course, the extremities are zero point five six here and the same over here.

113
00:06:55,070 --> 00:06:57,380
Now, I did this adding some points.

114
00:06:57,380 --> 00:07:01,390
I can add more points if I want to look something like this.

115
00:07:01,640 --> 00:07:05,300
And coming over here, we started using faster just here.

116
00:07:05,900 --> 00:07:11,870
Of course, I have to adjust this one if I wanted, you know, quite pointed so I can select one point,

117
00:07:11,870 --> 00:07:13,630
click on it and make it easier.

118
00:07:14,270 --> 00:07:16,070
But now the shape is selected.

119
00:07:16,310 --> 00:07:18,150
I'm going to go for this profile.

120
00:07:18,150 --> 00:07:23,360
Not just what happens when you go for a profile is going to take the whole path, is not going to break

121
00:07:23,360 --> 00:07:28,520
it and taking consideration the hard angles, just going to put it from the beginning to the end.

122
00:07:28,840 --> 00:07:29,480
Here you are.

123
00:07:29,780 --> 00:07:30,900
The profile has changed.

124
00:07:31,280 --> 00:07:35,540
Now, let's say you have a profile in mind that you want to work with.

125
00:07:35,840 --> 00:07:40,250
So I'm going to take the pencil tool or anything, actually, with the pencil tool.

126
00:07:40,460 --> 00:07:44,960
If you put a shift, you can create straight lines, four to five degrees or vertical lines.

127
00:07:44,960 --> 00:07:50,690
OK, if you press the option key now, it would be more interesting where you can create straight lines

128
00:07:50,900 --> 00:07:52,370
at any angle you like.

129
00:07:53,320 --> 00:08:00,490
So I'm going to do I'm going to create a straight path now, I will go for the withdrawal and then create

130
00:08:00,490 --> 00:08:01,940
something just like this.

131
00:08:02,030 --> 00:08:02,470
OK.

132
00:08:04,570 --> 00:08:11,650
Pretty amazing for the exercise that is now I have here an original profile, I would like to use this

133
00:08:11,650 --> 00:08:15,370
profile, you know, on other shapes or rectangle, whatever I like.

134
00:08:16,230 --> 00:08:23,340
I could save it to come to its profile here, you will notice you have add two profiles and then save

135
00:08:23,670 --> 00:08:26,910
the scholar profile one for Lucas.

136
00:08:27,150 --> 00:08:29,390
I will delete Rita and press.

137
00:08:29,400 --> 00:08:30,540
OK, that's it.

138
00:08:31,170 --> 00:08:34,650
So now I have this profile saved to come over here.

139
00:08:35,310 --> 00:08:38,700
Selection to select the the shape or the path here.

140
00:08:39,060 --> 00:08:43,040
Go back to my profile, which is just over here and here you are.

141
00:08:43,440 --> 00:08:46,650
My profile has been applied if you don't believe me.

142
00:08:46,800 --> 00:08:48,390
Let's take a similar shape.

143
00:08:48,660 --> 00:08:50,310
I'm going to go for a segment.

144
00:08:51,790 --> 00:08:59,500
And use the Whitstable I have now, it is profile, go to my little profile here and here you are increasing

145
00:08:59,500 --> 00:09:04,490
the stroke size and I created a new profile if you want to.

146
00:09:04,900 --> 00:09:06,820
Some people say this is advanced stuff.

147
00:09:06,820 --> 00:09:07,720
I don't think so.

148
00:09:08,050 --> 00:09:11,230
You know, coming over and saving a profile is not advanced.

149
00:09:12,140 --> 00:09:19,850
This is the way to work with the withdrawal in conjunction with the pencil tool or the curvature of

150
00:09:19,850 --> 00:09:25,580
the pen tool, whatever you like, a little long as you have a path, which is everything you can work

151
00:09:25,580 --> 00:09:25,730
with.

152
00:09:25,740 --> 00:09:29,930
The which now to create this one is becoming very easy.

153
00:09:30,170 --> 00:09:33,290
I invite you to play with this and have a lot of fun.

154
00:09:33,560 --> 00:09:40,340
You can create a a tour with the pen tool with whatever you like and use the withdrawal to create this

155
00:09:40,340 --> 00:09:41,120
awesome design.

156
00:09:41,840 --> 00:09:43,160
I will see you in the next video.