1
00:00:03,960 --> 00:00:10,140
Welcome, guys, to the logo of Reddit, it's basically easy, but yet I want to show you a couple of

2
00:00:10,140 --> 00:00:11,250
tips here that will help you.

3
00:00:11,250 --> 00:00:13,620
For example, create the mouth and the eyes.

4
00:00:13,710 --> 00:00:16,650
Mainly the mouth over here is very important.

5
00:00:17,890 --> 00:00:21,070
Let's start drawing this look, I'm going to zoom in a bit.

6
00:00:22,490 --> 00:00:28,850
And I noticed that I have two holes and three holes for these mine that's creating the bigger ellipses,

7
00:00:28,850 --> 00:00:33,080
the ears and then the eyes, the antenna, the smile will come.

8
00:00:34,390 --> 00:00:42,340
Let's go for the ritual and I'm going to click and drag just from here and let's set our fields to nothing

9
00:00:42,340 --> 00:00:44,440
and the stroke to just one one will do.

10
00:00:44,440 --> 00:00:46,000
It's a big design here.

11
00:00:46,570 --> 00:00:50,080
I'm going to try to adjust it to the best of my ability and even more.

12
00:00:52,340 --> 00:01:00,490
Another Elipse to do the year, year shift and option and OK, now we move it to where we wanted to

13
00:01:00,860 --> 00:01:03,800
make it bigger from this side pressing the shift.

14
00:01:04,010 --> 00:01:05,660
This is a circle now.

15
00:01:05,670 --> 00:01:06,560
Make it a bit bigger.

16
00:01:07,940 --> 00:01:10,200
And then try to put it as much as possible.

17
00:01:10,220 --> 00:01:11,090
Yes, that's very good.

18
00:01:11,660 --> 00:01:17,880
Now I need to replicate it selection to click on it and then shift and move it.

19
00:01:18,500 --> 00:01:20,360
Best option leaves one behind.

20
00:01:22,780 --> 00:01:25,990
I have the circles here to draw circles.

21
00:01:28,720 --> 00:01:29,860
Shift an option.

22
00:01:31,110 --> 00:01:35,680
And then just move it over here, make them a bit bigger, just a bit.

23
00:01:35,880 --> 00:01:36,490
That's OK.

24
00:01:36,930 --> 00:01:42,980
I need to duplicate a click and drag shift option at this one behind and just do it just like this.

25
00:01:44,060 --> 00:01:47,270
Now I can start using the ShareBuilder tool, I am punching the holes.

26
00:01:49,650 --> 00:01:54,750
We need to do the most first to do the most, of course, we can use a rectangle.

27
00:01:54,990 --> 00:01:58,320
The easiest way is this week you click over here.

28
00:01:58,350 --> 00:02:03,290
Notice how it's aligning with the center of the circle, because I did the circle in the right place.

29
00:02:03,690 --> 00:02:06,700
Then you draw and it's going to align also over here.

30
00:02:07,110 --> 00:02:14,040
This is a segment, but you use the White Arrow and you click on one of the points and turn it into

31
00:02:14,220 --> 00:02:20,170
a curve and you do the same for the other one curve and it's almost done.

32
00:02:20,550 --> 00:02:23,340
Now you can adjust the hand is the way you would like.

33
00:02:23,760 --> 00:02:25,980
I'm going to go to ten points.

34
00:02:25,980 --> 00:02:29,340
I think ten points will do here and reduce the opacity.

35
00:02:30,950 --> 00:02:34,950
And, of course, come to the stroke and make it around, that would be OK.

36
00:02:34,970 --> 00:02:39,250
Now we play with the Henders and try to adjust them as much as possible.

37
00:02:40,100 --> 00:02:44,220
This is fine here, I think, and this is fine just over here.

38
00:02:44,240 --> 00:02:45,110
Excellent work.

39
00:02:45,890 --> 00:02:48,890
All right, let's move them and make sure they are parallel.

40
00:02:50,170 --> 00:02:52,880
Maybe I should adjust over here, but I'm going to leave it for now.

41
00:02:53,260 --> 00:02:57,940
Maybe I should take it a bit down here and this one is OK.

42
00:02:58,690 --> 00:03:01,280
We are going to replay with the candles.

43
00:03:01,540 --> 00:03:02,680
I think it's fantastic.

44
00:03:03,280 --> 00:03:06,110
Now we take back the opacity to 100 percent.

45
00:03:06,670 --> 00:03:08,620
Let's go ahead and do the top.

46
00:03:09,380 --> 00:03:11,340
I'm going to do a rectangle, not a straw.

47
00:03:11,900 --> 00:03:15,650
I will draw the rectangle to the best of my ability just like this.

48
00:03:15,920 --> 00:03:17,820
The stroke is too big for this purpose.

49
00:03:18,170 --> 00:03:20,680
I'm going to make it zero point two five.

50
00:03:21,290 --> 00:03:23,150
And of course, I want to rotate it.

51
00:03:23,540 --> 00:03:24,200
It fits.

52
00:03:25,040 --> 00:03:31,080
In the rectangle over here, I need to adjust it at 100 percent has to go above.

53
00:03:31,670 --> 00:03:35,000
We can do the corner here with the widget.

54
00:03:36,160 --> 00:03:38,980
Let's zoom in and not bad at all.

55
00:03:39,800 --> 00:03:41,080
I'm going to leave it at that.

56
00:03:41,950 --> 00:03:49,360
Now, to do the other side, the best way is to control C, control V, the same rectangle because they

57
00:03:49,360 --> 00:03:54,970
are the same size and Komova tried to place it in the middle and then just rotate.

58
00:03:54,970 --> 00:03:56,160
Let's see if it's going to happen.

59
00:03:56,990 --> 00:03:59,880
Now, actually, they should snap this rotation is not good.

60
00:04:00,650 --> 00:04:04,430
This is better and actually they should snap just like this.

61
00:04:05,040 --> 00:04:05,870
Fantastic.

62
00:04:06,640 --> 00:04:10,720
You know, there is a discrepancy here, I'm going to leave it at that if I want, I just I'm going

63
00:04:10,720 --> 00:04:14,340
to take this one down, come back here and take this one down.

64
00:04:14,350 --> 00:04:22,420
Also stepping very wet and with the white arrow, all the dark direction, select only this corner and

65
00:04:22,420 --> 00:04:24,370
just do something like this.

66
00:04:24,910 --> 00:04:30,190
Obviously, with the selection tool, I'm going to make this one a bit smaller just inside.

67
00:04:31,480 --> 00:04:37,640
Then do the other circle, we have the Ellipse and maybe this one is too much over there.

68
00:04:37,650 --> 00:04:45,310
Let's put it here and just do the second ellipse just like this, bit bigger and move it down.

69
00:04:46,960 --> 00:04:52,630
It's quite an exercise to replicate logos, but also you want to understand the brains of the guys who

70
00:04:52,630 --> 00:04:55,930
has done them, and then I will show you the Google logo.

71
00:04:56,110 --> 00:04:57,720
Guys, it's awesome.

72
00:04:59,750 --> 00:05:04,450
We have done all this, let's select them all and start playing with the ShareBuilder tool.

73
00:05:05,250 --> 00:05:08,540
Let's go to the ShareBuilder to join these guys together.

74
00:05:09,780 --> 00:05:15,930
And John, with this and then the years should be joined with the head and so on and punch a hole here,

75
00:05:15,930 --> 00:05:19,930
punch a hole here, but I cannot touch this one.

76
00:05:20,280 --> 00:05:21,190
This is a stroke.

77
00:05:21,210 --> 00:05:23,610
It doesn't work with the ShareBuilder tool.

78
00:05:23,910 --> 00:05:25,300
It's not the shape, just a stroke.

79
00:05:25,680 --> 00:05:26,250
What to do.

80
00:05:26,250 --> 00:05:26,760
What to do.

81
00:05:27,270 --> 00:05:29,130
That's the big question that's selected.

82
00:05:29,460 --> 00:05:34,820
And the best way to go about it is to expand it, expanding meaning turning a stroke into a shape with

83
00:05:34,840 --> 00:05:36,270
a feel as simple as this.

84
00:05:36,780 --> 00:05:42,630
And you check both of them and say, OK, now if you go for your white Aratula, you notice you do not

85
00:05:42,630 --> 00:05:44,010
have a stroke anymore.

86
00:05:44,220 --> 00:05:49,810
You have a shape that has a field accident that works with the ShareBuilder tool.

87
00:05:50,460 --> 00:05:51,960
We are going to select both of them.

88
00:05:53,040 --> 00:05:58,520
Go for the ShareBuilder to come over here, plus minus now it's working fine, punchable.

89
00:05:59,630 --> 00:06:01,880
So now let's make it all white.

90
00:06:02,820 --> 00:06:04,830
And the stroke and remove the stroke.

91
00:06:04,860 --> 00:06:07,680
We don't want any stroke, but we know it's his white.

92
00:06:09,300 --> 00:06:14,680
Let's zoom out now, let's draw the bigger circle, which can come from over here.

93
00:06:15,090 --> 00:06:16,350
Now we have a white.

94
00:06:17,570 --> 00:06:19,780
I'm going to put a shift because it's a perfect circle.

95
00:06:21,010 --> 00:06:22,100
It's not working.

96
00:06:22,270 --> 00:06:26,890
I'm going to make no color at all, and then while I'm sort of.

97
00:06:28,470 --> 00:06:35,460
And from here, a bit more if it's snapping like this, just zooming in and here you are, snap out.

98
00:06:37,350 --> 00:06:44,610
Come to this side and adjusted, I'm using shift, that's cool, this one, let's use shift and snap

99
00:06:44,610 --> 00:06:46,540
it out a bit, OK?

100
00:06:46,560 --> 00:06:47,280
It's not stopping.

101
00:06:47,340 --> 00:06:48,480
I'm going to leave it at that.

102
00:06:49,700 --> 00:06:51,900
Now we need to call only the circle.

103
00:06:51,920 --> 00:06:57,230
That's all we have, selection, tool, pick tool or eyedropper tool.

104
00:06:58,080 --> 00:07:06,060
But we need to put it at the back to back, you have a perfect replicated logo, does is it wasn't so

105
00:07:06,060 --> 00:07:08,140
hard except this little dip.

106
00:07:08,160 --> 00:07:14,450
Here you are now a massive spending, turning a stroke into a shape with the guys.

107
00:07:14,460 --> 00:07:18,360
I hope this was fun and I hope you really enjoyed that.