WEBVTT

00:00.170 --> 00:03.980
Please watch the entire video before going to the next section.

00:04.100 --> 00:08.190
So this course is mainly divided into four big parts.

00:08.210 --> 00:13.850
The first part on communication starts after the installation and configuration.

00:13.880 --> 00:20.090
The second part will target Arduino functionalities and the third part, Raspberry Pi functionalities.

00:20.120 --> 00:27.860
Each of the parts one, two and three are divided into a hands on explanation section and a practice

00:27.860 --> 00:32.270
section with many projects that I also call activities.

00:32.300 --> 00:38.060
Finally, the fourth part is the final project of the course, which is the intercom system.

00:38.060 --> 00:44.340
You had a preview of now a few recommendations so you can get the most out of this course.

00:44.360 --> 00:50.900
First, follow the course in the order because all the sections and lessons are built on top of each

00:50.900 --> 00:51.300
other.

00:51.320 --> 00:53.120
Then you can come back to any lesson.

00:53.120 --> 00:55.340
But first, start from the beginning.

00:55.340 --> 01:03.030
When I write code and do experiments first, watch the lesson and then write the code and do the experiments

01:03.030 --> 01:04.040
by yourself.

01:04.050 --> 01:09.180
Watching Plus doing is much more efficient than just watching.

01:09.180 --> 01:13.630
And finally, I will give you many activities and projects during the course.

01:13.650 --> 01:19.890
They can be quite challenging, but make sure to give them a try and spend a fair amount of time on

01:19.890 --> 01:22.070
them before you watch the solution.

01:22.080 --> 01:25.670
This is the only way you will truly make progress.

01:25.680 --> 01:28.170
And one additional word of caution.

01:28.170 --> 01:31.560
Well, pay attention when manipulating the hardware.

01:31.590 --> 01:35.520
Always power off everything before you modify the circuit.

01:35.520 --> 01:42.180
And also for the Raspberry Pi, make sure you correctly shut it down like a normal computer before you

01:42.180 --> 01:43.530
remove the power cable.

01:43.530 --> 01:48.750
And with that said, let's start with the installation and the configuration for this course.