1

00:00:00,400  -->  00:00:04,880
There is more to Extrude
than making a 3D model from a sketch.

2

00:00:05,560  -->  00:00:09,160
Activate Extrude from the toolbar
or with keyboard shortcut E.

3

00:00:09,880  -->  00:00:13,440
You can select one or multiple profiles,
and you can also choose

4

00:00:13,440  -->  00:00:18,600
if you want to Extrude a solid body or a
thin Extrude with custom wall thickness

5

00:00:18,600  -->  00:00:22,520
and with locations set from either
the inside, outside,

6

00:00:22,520  -->  00:00:25,520
or center.

7

00:00:28,960  -->  00:00:30,800
The default setting is to start

8

00:00:30,800  -->  00:00:33,280
your Extrude Commando
from the profile plane,

9

00:00:33,280  -->  00:00:36,680
but you can also start
with an offset distance from the profile

10

00:00:36,680  -->  00:00:40,200
or from another object,
such as a construction plane.

11

00:00:46,920  -->  00:00:48,720
This gives you great flexibility

12

00:00:48,720  -->  00:00:51,720
when you design.

13

00:00:58,080  -->  00:01:01,000
It is easy to Extrude
in multiple directions,

14

00:01:01,000  -->  00:01:05,000
both with custom dimensions
and with symmetric settings.

15

00:01:14,560  -->  00:01:15,520
Use the measurement

16

00:01:15,520  -->  00:01:19,200
settings to select
if you want your symmetric Extrude

17

00:01:19,200  -->  00:01:22,600
distance to be valid for the whole length,
or for the half length.

18

00:01:23,720  -->  00:01:24,600
For example,

19

00:01:24,600  -->  00:01:31,120
do you want the distance
200mm on each side or a total of 200mm,

20

00:01:31,120  -->  00:01:34,760
which equals 100mm on each side?

21

00:01:37,000  -->  00:01:39,920
You can set a positive or negative
taper angle

22

00:01:39,920  -->  00:01:42,920
depending on your design goal.

23

00:01:51,160  -->  00:01:54,160
And just like the other
demonstrated options, this works

24

00:01:54,160  -->  00:01:57,160
well with the thin Extrude option as well.

25

00:02:02,000  -->  00:02:02,840
Let's create

26

00:02:02,840  -->  00:02:06,000
a sketch on a face
to demonstrate Operation Type.

27

00:02:06,400  -->  00:02:10,040
First, I'll just go back
and edit our Extrude feature

28

00:02:10,040  -->  00:02:13,040
and turn it into a solid model again.

29

00:02:17,520  -->  00:02:19,400
When you drag your sketch upwards,

30

00:02:19,400  -->  00:02:22,400
a Join operation is suggested.

31

00:02:22,600  -->  00:02:25,600
This new body will be part
of your current body.

32

00:02:26,000  -->  00:02:29,840
Change to a new body or new component
if you want to create this

33

00:02:29,840  -->  00:02:32,840
as an individual part.

34

00:02:33,640  -->  00:02:37,800
Cut is automatically suggested
when you go inside your body,

35

00:02:37,800  -->  00:02:41,000
and the red area
will be removed in this cut operation.

36

00:02:41,960  -->  00:02:42,640
You can cut

37

00:02:42,640  -->  00:02:46,400
a specific distance, to an object
or through the entire body,

38

00:02:46,400  -->  00:02:50,360
including several bodies or components
if you have that in your model.

39

00:02:52,840  -->  00:02:55,800
You can also flip directions
to the other direction,

40

00:02:55,800  -->  00:02:58,800
which could be useful in some cases,
but not this one.

41

00:02:59,680  -->  00:03:02,680
You can also cut with the taper angle

42

00:03:06,080  -->  00:03:08,880
Cut Intersect is an interesting commando.

43

00:03:08,880  -->  00:03:12,160
It creates a new body
from your cut selection and removes

44

00:03:12,160  -->  00:03:15,160
the rest of the body.

45

00:03:15,160  -->  00:03:16,840
You'll see more from Extrude

46

00:03:16,840  -->  00:03:21,040
when you start the first project,
but first, see you in the next lesson!

47

00:03:21,280  -->  00:03:21,720
Thank you.