WEBVTT 00:00.180 --> 00:06.390 Let us know at the infrared remote controller to our secret, so, as always, I'm going to start first 00:06.390 --> 00:11.070 with the Dinko get simulation and then do the real secret. 00:11.370 --> 00:17.310 And we are going to start from the previous secret, which contains the LCD display screen that I'm 00:17.310 --> 00:18.600 going to duplicate. 00:21.000 --> 00:27.700 And I'm going to rename it directly, I am for Infrared Remote Control. 00:29.070 --> 00:32.850 So, again, I'm not going to change anything in the existing Secrett. 00:32.850 --> 00:35.310 I'm just going to add one new component. 00:35.680 --> 00:40.580 OK, so far, the infrared remote control that we actually need to add two components. 00:41.070 --> 00:42.480 I'm going to infrared. 00:43.320 --> 00:49.650 So not to confuse with the sensor, which is a passive infrared sensor, which is different here. 00:49.660 --> 00:52.800 We are going to use the infrared sensor, that one. 00:53.100 --> 00:58.830 I'm going to take that component, which has three things here and the infrared remote control. 00:59.550 --> 01:05.480 OK, you need the sensor and control so the controller will not be plugged to anything. 01:05.520 --> 01:09.300 OK, this is something you can put just on the side of your second. 01:09.450 --> 01:11.310 And this one we are going to put it. 01:11.340 --> 01:16.440 So let's put it, for example, here, willing to put it on the secretes. 01:16.680 --> 01:18.880 So we have three different pins. 01:18.900 --> 01:26.280 OK, you have about Genndy and Power, that one thing to pay attention here is that actually the other 01:26.280 --> 01:33.900 of the things for the simulation will be different from the other of the thing you may have in the infrared 01:33.900 --> 01:35.340 sensor from your kit. 01:35.690 --> 01:38.600 OK, I'm going to come back to this just a little bit later. 01:38.610 --> 01:45.420 So on this component, you have three piece, OK, you have the ground being the pope and the data. 01:45.890 --> 01:47.580 OK, so let's find the ground. 01:47.790 --> 01:49.890 First round here is in the middle. 01:50.850 --> 01:55.670 I'm going to plug it to the ground like that and then let's find. 01:55.920 --> 01:57.240 So we have power, OK? 01:57.370 --> 01:58.110 Power. 01:58.140 --> 02:00.690 It's power to power. 02:01.320 --> 02:01.640 Right. 02:01.860 --> 02:03.640 Make sure you have correctly plugged here. 02:03.660 --> 02:05.880 This is the ground that this is the power. 02:06.510 --> 02:10.500 And we have another beam here out, which is output, which is the data. 02:10.950 --> 02:14.760 And we are going to need to use just a simple digital pinacate. 02:14.760 --> 02:16.280 Nothing special for this one. 02:16.560 --> 02:21.560 So I'm going to take this and we still have an empty being here. 02:21.570 --> 02:21.930 No. 02:21.930 --> 02:22.440 Five. 02:23.730 --> 02:28.470 And let's change color to let's use think here. 02:28.710 --> 02:34.530 OK, great, so Genndy to Genndy, power to the power. 02:34.530 --> 02:40.650 And then the thing that goes to Digital Opinium five or any other digital pen you want, OK. 02:40.650 --> 02:45.510 Or any other opinion to use as a digital B and then these I can just put it there. 02:46.230 --> 02:53.310 So this controller will send an infrared signal to this syncytial and then we will be able to read that 02:53.310 --> 02:56.430 on the avenue and know what button was pressed. 02:57.000 --> 03:01.170 OK, and the way you are going to use this in the simulation is very simple. 03:01.920 --> 03:07.470 When you run the code, you simply are going to click with your mouse on the different numbers and that 03:08.100 --> 03:09.450 the different buttons here. 03:09.570 --> 03:14.160 And that will send a signal to your infrared sensor and your other will be able to read it. 03:14.190 --> 03:19.500 So just press on the button and when the code is running, of course, and that will work just fine. 03:20.410 --> 03:27.790 And this is the real hardware system, so I have put here the infrared sensor and here I have the remote 03:27.790 --> 03:32.890 controller, so the first thing to pay attention to is make sure you have correctly. 03:33.610 --> 03:36.040 But the battery inside the controller. 03:36.040 --> 03:39.240 So maybe it's already there or you have to put it and it's on the side. 03:39.250 --> 03:41.860 So make sure the battery is OK. 03:42.070 --> 03:45.910 Once the battery is in the controller, you are sure that is going to work. 03:45.910 --> 03:47.640 So you can just put it on the site. 03:48.100 --> 03:48.960 The battery is not here. 03:48.970 --> 03:50.860 And then, of course, that's not going to work. 03:51.370 --> 03:57.070 Now, the infrared controls, I have put it there, I left some place here for the next sensor. 03:57.070 --> 04:03.700 We are going to add and make sure that I don't put it in front of the ultrasonic sensor. 04:03.970 --> 04:06.630 And so I don't connect it to any of the pain of the engine. 04:06.640 --> 04:09.790 You can make sure you take three empty lines. 04:10.030 --> 04:12.430 So I'm going to run it here to show you. 04:13.520 --> 04:21.020 And this is actually different from the sense we have on the simulation with Dinko Karaoke with DeCock, 04:21.030 --> 04:23.330 and we had the ground in the middle here. 04:23.660 --> 04:29.690 But here, the ground, as you can see, is only one of the opposite, one of the sides here on the 04:29.690 --> 04:30.050 left. 04:30.440 --> 04:31.480 So unlicenced. 04:31.480 --> 04:33.110 So I have G and why. 04:33.140 --> 04:39.410 So if you have the same as me, G means ground here, which is the first you can see Blakeway or goes 04:39.410 --> 04:43.260 to ground and then the middle one is the poem. 04:43.330 --> 04:51.500 OK, so I have put a red table which goes to the power line and the last one to Y is for the data which 04:51.500 --> 04:58.230 is white light wire which goes it to digital team number five. 04:58.250 --> 05:00.540 OK, just like I did in the simulation. 05:00.920 --> 05:04.300 So for me it's ground power and data. 05:04.850 --> 05:12.080 So make sure you correctly check your sensor and that you read the information and maybe it's different 05:12.080 --> 05:12.500 than me. 05:12.930 --> 05:15.100 OK, maybe it's the same as the simulation. 05:15.110 --> 05:18.890 So make sure you have the correct setup before you pull on. 05:19.790 --> 05:20.800 And all right. 05:21.020 --> 05:22.550 The secret is no.