The first way to communicate with cell communication is, of course, from the Arab world to your computer,
and that's what you've already used quite a lot so far.
So I'm just going to give you a quick recap here, as well as some useful tips.
What if you do so first?
Of course, you have seen that you need to set up the cell communication.
We say that you and you need to provide a birth rate, which is basically the speed of the data transfer.
So this nine thousand six hundred is a pretty common low rate that works actually will.
And you will find this in many of the projects and examples on the Internet.
So this is basically what you do in the setup.
And usually that's one of the first line I tried to set up before everything else.
So then you can use that print or print, and that's why we've been telling hello.
All right.
So you can use the print of print in the setup function in the loop function or in any other function
that you create.
As long as you have initialized the cell communication at the beginning of your setup function, you
can use, say, the print and print everywhere in your program.
So now if you so make sure the board is connected, you upload code its name it to your.
And on the sale monitor also, you can see our group on tools, say on monitor or you have to get a
shot at.
I'm going to click here.
And you will see.
Hello.
OK, that's quite a.
So you one important thing is to make sure that the birth right corresponds in the sale monitor and
in your code.
So this is the same monitor is actually your computer.
OK, so that is the side of your computer.
What you see on the code is going to you are in a bowl and these are printed and we come from you untrainable
all the way through the USB cable to your computer.
And this the cellular monitor in the receiving side for the data you send of a cell.
So that's pretty much it all you need to know.
Now, just one tip, because here you've seen that they're using standard printing.
And every time it goes back to a new line on the same money talk that if you print multiple times,
hello, you will have hello and then hello here, here, here.
What if you want to print several things on the same line?
Well, in this case, let's say you have a viable ENTI, which is seven and you want to print, for
example, the value is and then the value and then something else.
And you want to bring that on the same line.
But what you can do is use, say, aldred print.
Let's see.
The value is let's put this then another pilot, Brent, with let's say this time we use I so this would
be seven.
And say that.
Bring Ellen Wave and say we want to finish with a gut, OK, and let's see what it does.
Well, let's applaud the program and open the same monitor and you will see the value is seven.
Let's put that actually in the loop.
Have a delay of one Segan.
And yes, of course, we have a problem because I it was declared in the setup, this is a different
scope, so it's simply not working.
So I'm just going to create created in the loop because.
What is the example, we don't need to talk differently every time and you will see the value is seven
very seven with a dot and a new line every time, OK?
But that's a quite convenient way to send one string over just one line, you use print instead of printing.
So everything will be so that I will be just returned after this.
And for the last piece of string, you just add.
So if we go back to a new line for the next data you sent of a sale.