The following activities and the project we are going to use, the current secret we have, which has
an entity, a Barberton and important Sheremeta, but actually I'm going to add two more entities to
the secret.
OK, so we can make Neisser project.
I'm going to first show you and Dengate and then with the real secret, with real hardware component.
So here we have our put on Shimura secret and I'm going to duplicate it.
OK, so we can keep it and we can also start a new project from that one.
So copy of that.
I'm going to name it three entities.
OK.
Because that's what we're going to do.
We have our first lady here, OK, connected to ground and then with her two hundred and twenty unregister
to a pin on the arena.
So I'm going to simply do the same thing for two more.
And it is so I'm simply taking an entity from the right and I put it there.
Let's take another end and let's put it this.
I'm going to maybe place it later and I'm going to choose for the second lady so you can click on the
lady.
And here you choose the color.
Yes, I'm going to choose yellow and here I'm going to choose green.
So in your energy kit, if you don't have those exact clothes, that's really not the problem and deal
will do OK.
This is just to make it nicer.
So as you can see, we have kind of a traffic light system with red, yellow and green.
And now let's connect those entities.
So the first thing is to connect the shelter leg like we need for this one, getting the shorter leg
to the ground.
But I'm going to click here.
Click here.
And color is black.
OK, and then we need a 220 on register for that as well.
So what I can do is simply click on that register and do control C, control V, OK, that we copy the
register and the same place and then I can grab it, as you can see, and I can move it.
The other option is simply you just click on the register, you drag it there and you choose two hundred
and twenty on the back like you, OK is going to move it that way here.
So I'm going to connect you the shuttle to the ground as well.
Color is black and I'm going to control the control the to copy the register.
And then we have our three races to locate one for each.
And also we need to connect this leg of the register to a pin.
So I have one where here we have one wire here.
And before we connect the end, it is two digital pins.
I'm actually going to change the connection for this first entity.
So first that you were on in 12, then we changed it to 11 to use the Pineview.
Um, and then we changed it to a five to see how we could use an another pin as a digital pin.
I'm going simply to remove that connection.
And now I'm going to connect this first aid to pin number.
Well, again.
And then this second entity to pin number 11.
And this PIN number.
All right, and maybe change the color of all the different.
Why is just so we do.
So it's easy to recognize the different ways here.
All right, so you can see that what we've done for the first lady is exactly what we've done for the
second lady and exactly what we've done for the third.
And the important thing here is to make sure you don't connect to the wrong components together.
For example, if that Ed would have got it there, then we have a problem because the shuttle is connected
also to this line with the LCD and the PIN number even.
Okay, so make sure like this that you don't make connections that could lead to a problem.
All right, then the secret is finished.
And here is the real secret with the real how the components, of course, first I have disconnected
the original it's export us and then I have plugged that I have put to more energy use.
OK, you can see it.
The shot leg is going to the ground and then the longer leg is connected to one new of labor line.
OK, let's mix them together with other components.
And then for each longer leg I have a with 220 unregister which goes yet to another new available line
came from this invisible line.
I have a wire going to a digital pen, so I have changed the digital pin here for the lady goes to pin
a 12 and in the 11 and pin number 10.
One thing to pay attention to is to, of course, not mix.
OK, here, everything is quite packed.
And this is because we are going to add more components in the following of these schools.
I have just packed the edges here, but as you can see, nothing is touching each other.
So make sure, for example, you don't have the wider metallic parts touching each other between different
components, but is very important.
And you should be fine.
All right.
And now let's create some fun project.