WEBVTT 00:00.180 --> 00:08.630 This is the solution to the premiers and first activity where you need to combine Linc Energy and save 00:08.640 --> 00:09.640 money, for example. 00:10.290 --> 00:15.330 So if you don't understand everything right now, it's not really a problem. 00:15.570 --> 00:18.860 Just continue and everything would make more sense. 00:19.140 --> 00:20.690 The following sections. 00:20.700 --> 00:27.440 OK, one other important thing is that you can understand a little bit how things are working and then 00:27.450 --> 00:29.840 will dive into much more details later. 00:30.540 --> 00:36.690 And to be able to finish this activity first, make sure that you could correctly execute all of the 00:36.690 --> 00:38.940 programs from the previous lessons. 00:39.240 --> 00:39.660 All right. 00:39.660 --> 00:41.130 And now let's start with the activity. 00:41.490 --> 00:47.430 So I'm going to remove that comment in lines that we don't need anymore. 00:48.090 --> 00:54.070 And so we need to blink an entity and also to use the same communication. 00:54.720 --> 00:57.030 So what I'm going to do is to use PIN. 00:58.400 --> 01:09.800 Mode with so 13 and output to initialize the energy, so to initiate the pin for the energy and then 01:09.800 --> 01:15.120 say all that, begin with nine thousand six hundred. 01:15.950 --> 01:19.550 So there is not really any other specific. 01:20.530 --> 01:28.360 And for that program here, both institutions are different and don't need each other to work. 01:28.960 --> 01:33.160 But what I'm going to do is to put first initialized the cellular communication. 01:33.520 --> 01:33.930 All right. 01:33.940 --> 01:36.730 Everything is set up now in the loop. 01:36.740 --> 01:44.680 What we can do is to make the blink so digital, right, that in a. 01:46.930 --> 01:54.400 And then we wait for so we need to operate on for two seconds, so I'm going to wait for two thousand 01:55.030 --> 02:02.140 milliseconds and then digital, right, 13 we load. 02:03.620 --> 02:09.450 And another delay of one cigarette this time, so 1000 milliseconds. 02:10.430 --> 02:17.270 So with this, we should be able to see the energy bolt on for two seconds and then pulled off for one 02:17.270 --> 02:17.730 cigarette. 02:18.200 --> 02:22.460 And we also want to print something when we pull on the editing. 02:22.700 --> 02:30.760 So let's see here we can but say Algate print L.N. with energy on. 02:31.580 --> 02:36.290 And again, don't forget the SEMICON OK at the end of every instruction. 02:37.350 --> 02:44.490 So we print energy and we pour on the energy, then we wait for two seconds and then we can print. 02:47.530 --> 02:48.820 Any day of. 02:50.560 --> 02:54.970 Before we pull out of the enemy and then we wait for one thing. 02:55.690 --> 03:00.310 All right, so that is the complete code for this activity, not where I'm going to do this. 03:00.310 --> 03:01.530 I'm going to verify. 03:02.170 --> 03:06.940 So let's name it activity one safe. 03:09.290 --> 03:16.260 You can see them campaigning great, so it's working now, let's make sure in all that we have, you 03:16.280 --> 03:22.910 know, and the correct so the correct board and the correct spot we can upload to program. 03:23.550 --> 03:25.860 I'm going to show up and say I'll monitor. 03:28.300 --> 03:37.390 So you can see the energy blink on and off, and when we turned on the science monitor, also Prince 03:37.430 --> 03:44.100 Endian and when the energy turns of the sand, little Prince Ali of. 03:45.300 --> 03:48.430 All right, that's the end of this first activity. 03:48.900 --> 03:54.900 Make sure that you are comfortable with what happened in this section before you continue. 03:55.110 --> 03:58.920 And now let's see how to build your First Circuit.