In this listen, I'm going to show you very quickly what are the different ways to restart your program.
So, first of all, you will not get surprised if your program restarts and you don't know what you
did.
And also, if you seem to want to restart to start the program again from the beginning, then you know
how to do it.
So the first obvious way, of course, is to pull it off.
You do know, for example, you unplug the USB cable and then you plug it back again to your computer.
This will pull out of the Arduino and then put on the avenue.
And once the adeno is put on the program directly, that's OK.
But this isn't maybe not the best option whenever you want to restart.
OK, you want to keep your plugged to your computer.
So what you can do is you can see here we have a red button on the right button on the other node,
and this is called the reset button.
So here it's on the top left.
It may be in a different place for you depending on your blog.
And simply if you press this button, then the program is it's so simple.
We are going to test that.
All right.
So I haven't been this science monitor with this program that you already know.
And I'm going to press the reset button and you can see we have Elmo.
How do you know again?
So the program has been reset because we have started again from the set up function.
OK, and now from the software side, so directly from your computer, how to restart the program?
Well, actually, if you open the same monitor again, so if you close it and open it this way to reset
the program, as you can see here.
Hello, Arlingham.
If I close it and open it again, this will restart the program.
And to restart, you can also actually upload the code again, wi fi, upload the code.
Well.
Bloating and then imploding into program has been restarted, so I can see that also we decided when
I click on this, the program to restart, OK, and then I'm going to upload again.
You can see it kind of stuck here on the same monitor and then.
Hello.
Are you OK?
You can see the program has restarted.
All right, so to restart, you can simply this is maybe the easiest way is simply to press the reset
button on the original.
Otherwise you can just open close the same door.
But note that this works only for some Archibald's.
So, for example, you know, MIGA and I know it's fine, but other boats like Leonardo, this will
not work.
So the most universal way to restart from the Arduino ID directly is you can simply upload the code.
OK, and this will restart the program.